Free Quote

 

 

What're your ideas with regards to How to Troubleshoot and Repair an Electric Water Heater?

Numerous modern-day residences take advantage of an electrical hot water heater for their heating system, due to its convenience and simplicity of use. Nevertheless, much like any other electric home appliances, issues might emerge with its use, unexpectedly. It can be really aggravating to get up to a chilly shower rather than a warm one or having your bathroom with water that isn't warm adequate or perhaps also warm. Whatever the instance may be, water heater problems can be quite nerve-racking. Fortunately, we've made a list of possible services to your water heater problems. There are a number of elements that might cause a lot of these problems, it could be an issue with the power supply, the electric burner, or the thermostat. Prior to doing anything, guarantee you shut off the primary power supply for safety. Whatever the problem is, getting it fixed should not pose way too much of a problem if you comply with these steps:

 

Call An Expert:

If after replacing all malfunctioning components as well as resetting your temperature, the water heater still isn't working, you may need to get in touch with a professional plumber for an expert viewpoint. The problem with your heater could be that the hot and cold faucets have actually been switched over or it might be undersized for the quantity of warm water needed in your home. Whatever the case may be, a professional plumber would certainly aid address the trouble.

 

Inspect Your Power Supply:

As basic as this may appear, it is really essential. Without appropriate power, your water heater will not function. So the first thing to do when your water instantly retires is to validate that it isn't a power issue. Inspect if the fuse is blown out or the circuit breaker stumbled. If the breaker is the problem, simply turn it on and off once again. Replace any busted or damaged fuse. Check the home appliance with power after these changes to see if it's currently functioning.

 

Inspect Your Thermostat:

If your water heater still isn't functioning or the water appearing isn't hot enough, you might need to check the temperature level setups on your upper thermostat. Ensure the breaker is turned off before doing anything. Open up the gain access to panel and press the red button for temperature level reset above the thermostat. This should aid heat up the water. Turn the breaker back on as well as examine if the issue has been solved.

 

Check the Burner in the Water Heater:

If it's not a power trouble, then attempt having a look at your burner if it is still working. Examine each of your heating elements to make sure the issue isn't with any of them. If any one of them is defective, change that component and then inspect whether the hot water is back on.

 

Verdict

Water heater troubles are not always significant. Much of them result from minor problems like a blown fuse or damaged heating element. Replacing the malfunctioning components should work. Nonetheless, if you are still incapable to solve the issue, give a call to your nearby plumber ahead to get it dealt with.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

We hope you enjoyed reading our piece about Hot Water Heater Repair. Thanks so much for finding the time to browse our article. Liked our blog? Please share it. Let someone else check it out. Thank you for your time. Kindly check up our site back soon.

Set An Appointment